HPC001S comprehensive performance tester for fresh concrete

1、 Product Introduction:

The HPC001S Freshly Mixed Concrete Comprehensive Performance Tester (referred to as the Freshly Mixed Concrete Tester) is a real-time testing instrument designed by our company specifically for testing the technical indicators of freshly mixed concrete on construction sites

It is based on the principle of concrete rheology and analyzes the basic indicators of concrete by detecting its viscosity. After extensive experimentation, it has been proven that this method has good correlation. Its outstanding advantages are: suitable detection speed, easy to carry and use, excellent analysis results, and digitalization of test results

The current cone slump detection methods are inconvenient to operate and have significant human errors, which can no longer meet the development requirements of modern construction technology. The emergence of the HPC-001S comprehensive performance tester for fresh concrete will replace traditional measurement methods that are bulky and have large measurement errors, providing protection for modern construction

The "HPC001S New Concrete Comprehensive Performance Tester" product series has two types: economical and comprehensive. Among them, the "New Concrete Comprehensive Performance Tester" (economical) can detect concrete slump, water cement ratio, construction temperature, and predict 28 day strength, and calculate the test results. Mainly used for timely measurement of the above indicators on construction sites

The "New Concrete Comprehensive Performance Tester" (comprehensive type) can detect all economic projects and output the processing results to a personal computer for analysis of test data and report output

Compared with purchased products, this tester is easier to operate and more user-friendly. It has a fully Chinese menu, built-in dozens of experience curves, no need for calibration, and can be used directly. It is equipped with data transmission software and can be connected to a computer for data transmission and printing of test reports

2. Performance indicators:

1、 Slump: 10-260mm Error: ± 10% Test time ≮ 8s

2. Water cement ratio: 0.20-0.60 Error: ± 5%

3. 28 day strength: 10-80MPa Error: ± 10%

4. Cement consistency: hammer settlement scale 13-40mm

5. Temperature:- 20 ° C to+80 ° C Error: ± 5% Test time ≮ 8s

6. Data storage: 100 sets of data

7. Working environment:

Working temperature: - 20 ° C~+70 ° C

Storage temperature: - 40 ° C to+90 ° C

Relative humidity: ≤ 90% RH

Altitude: ≮ 4000

Impact: 980m/s2

Insulation voltage: ≮ 5000V

8. Other configurations:

Display screen: 60mm × 20mm

Built in power supply: NiHM 6V/1.3Ah

6V charger: one, weight 500g

Fixed handle: one

Detection head: one

Transmission cable: one

Data processing software: one set